Fiber Sensor FG-200-产品中心-深圳市天工机械制造技术开发有限公司

Light source	Red light source Red light source
Model	FG-200N FG-200P FG-200N-M8 FG-200N-M8
Detection output	NPN open-circuit collector transistor Maximum inflow current: 100mA External voltage below 30V (at detection output and 0V) Residual voltage: below 1.0V (when inflow current is 50mA) Less than 0.4V (current 16 mA) PNP output type PNP open-circuit collector transistor Maximum inflow current: 100mA External voltage below 30V (at detection output and +V) Residual voltage: below 2.0V (when inflow current is 50mA) Less than 1.0V (current 16 mA)
output setting	-
Operation output	ON at detection or non-detection, can be set by keystrokes
Self diagnosis	Output ON during unstable detection lasts for 40 ms, and output is cut off automatically when short circuit is output, and protection signal lasts until short circuit is removed.
Reaction time	Switching frequency: 1KHz, reaction time 500uS
Detection distance	Red light source: diffuse reflection detection distance: 200 mm (diameter 1 mm core) counter-fire detection distance: 800 mm (diameter 1 mm core)
Delay function	0~9999ms optional
Transmitting power	200% ,100%,50%,25%,12% the five of transmit power can be set by keys
Special Output 1	Rising edge pulse output and falling edge pulse output (pulse width is achieved by setting delay time)
Special Output 2	-
Special input	-
Ambient temperature	-10℃~50℃(No dew or frost ) storage :-20℃~70℃
Ambient humidity	35-85% RH, storage: 35-85% RH
Remarks	-

产品详情